Our ERCES installations for Georgetown properties are engineered to meet NFPA 1225 (2022 edition), IFC §510, IBC §915, UL 2524, and applicable NEC requirements, so your building clears Georgetown Fire Department inspection on the first try.
Georgetown is one of the fastest-growing cities in Texas, and that growth, from Wolf Ranch Town Center to new office space along the I-35 corridor, comes with an obligation to keep first responders connected inside every building. TC Tech Systems specializes in installing Emergency Responder Communications Enhancement Systems (ERCES) for commercial and multi-family properties throughout Georgetown and Williamson County.
Whether your property needs a benchmark grid test, an annual recertification, donor and coverage antennas, battery backup units, repeaters, or a complete ground-up installation, we supply and install everything required to satisfy Georgetown’s adopted fire code and keep your occupants safe. Don’t gamble with life-safety compliance on a technicality. Reach out today to schedule a consultation and estimate for your Georgetown building.
NFPA 1225 and IFC §510.1 require ERCES in new construction, major remodels, and any building where the local AHJ determines public safety radio coverage inside the structure is inadequate. In Georgetown, that commonly includes retail centers, senior living communities, parking structures, and any building the fire marshal flags during plan review.
Every Georgetown project starts with a signal propagation survey, the first step NFPA 1225 requires, to confirm whether a system is needed and establish the coverage baseline the AHJ will use for approval. You’ll hear this RF survey called a “grid test” or “benchmark test.”
Our ERCES installations give first responders, firefighters, police, and EMS reliable two-way radio coverage throughout your Georgetown building, meeting the requirements laid out in NFPA 1225. We coordinate directly with the Georgetown Fire Department from initial design through final sign-off, installing only UL 2524 Listed equipment and NFPA 72-compliant annunciator panels tied into your fire alarm control panel. Our installs draw on trusted manufacturers including ADRF, Comba, Honeywell FiPlex, Potter, RFS, and Westell.
We make sure your Georgetown property satisfies every ERCES requirement and is fully equipped to broadcast public safety DAS signals so responders can communicate reliably both inside and outside the building. With our ongoing maintenance and support, your property stays compliant year after year and keeps staff, tenants, and visitors connected to the help they need when it matters most.
Not sure if your Georgetown property meets every applicable fire and safety code? We provide full-scope ERCES benchmarking and installation services for the following types of commercial buildings across Georgetown and Williamson County:
Reach out to TC Tech to schedule your Georgetown ERCES benchmark test and installation consultation, or get in touch to learn more about our services.
Our turnkey ERCES installations for Georgetown properties are handled by a team with the certifications, equipment, and field experience to get your building compliant the first time around.
Our technicians hold current ERCES certifications and know the Georgetown Fire Department’s review process, so your installation clears municipal and federal requirements without delays.
We know first responders depend on clear radio coverage the moment an emergency starts. Every Georgetown installation is built for dependable performance when it counts most.
No two Georgetown buildings are alike, from a Wolf Ranch retail center to a historic downtown storefront. We design a coverage solution matched to your property’s structure.
Our systems tie into your existing fire alarm and electrical infrastructure with minimal disruption, keeping your Georgetown building operational.
TC Tech holds manufacturer certifications from ADRF, Comba, Honeywell FiPlex, and Potter, and our engineers carry the FCC licensing required to provide ERCES solutions under national and Georgetown-adopted fire code requirements. We’re also a certified benchmark testing partner of PCTel, a leading manufacturer of testing systems.
We’ve partnered with Georgetown building owners, contractors, architects, and general contractors to deliver carrier-grade ERCES systems for properties of every size, from single-tenant offices to large mixed-use developments.
Passing your Georgetown building’s ERCES inspection the first time saves you money and keeps your project on schedule. Set up a consultation with TC Tech for your Emergency Responder Communications Enhancement System installation, or get in touch to see the full scope of what we offer.
A safe, code-compliant building doesn’t happen by accident. If you’re ready to get your Georgetown property covered, reach out to TC Tech to set up a consultation for your Emergency Responder Communications Enhancement System installation, or to learn more about our services in Georgetown.
We begin with a full assessment of your Georgetown property to identify its specific coverage needs.
From that assessment, we design a custom ERCES package matched to your building’s layout, ensuring full coverage and compliance with Georgetown’s adopted fire code.
Our certified technicians install the system with minimal disruption to your daily operations, holding to the highest standards of workmanship and safety.
Once installed, we run rigorous testing to confirm performance, then hand over the documentation the Georgetown Fire Department needs for compliance sign-off.
Finally, we provide continuous maintenance and support so your system stays operational, keeping your Georgetown building secure, compliant, and running efficiently year-round.
ERRCS, ERCES, and ERC all describe the same building system, the one that keeps first responders’ radios working inside your walls. The terms have shifted as codes were updated: ERRCS, or Emergency Responder Radio Communication System, is the older term still used in many fire codes and permit documents referencing IFC §510. ERCES, Emergency Responder Communications Enhancement System, is the current term under NFPA 1225 (2022), the national standard governing design, installation, testing, and maintenance. If the Georgetown Fire Department references NFPA 1225 on your permit, they mean ERCES. ERC, Emergency Radio Coverage, is shorthand you may still see in some older paperwork, referring to the same requirement.
Georgetown’s newer concrete-and-steel retail centers, senior living facilities, and multi-story offices routinely block the radio frequencies firefighters, police, and EMS depend on during an emergency. When a responder’s radio drops out mid-building, they lose contact with their team and with incident command outside. That’s a life-safety gap, not a minor inconvenience. ERCES closes it by amplifying public safety radio signals through a UL 2524 Listed bi-directional amplifier tied to a distributed antenna system, so coverage holds up in every stairwell, corridor, and basement level of your Georgetown building.
Building and fire codes require commercial and multi-family properties to meet public safety communication standards before they can be occupied. The Georgetown Fire Department, like most Texas jurisdictions, requires a passing grid test or a permitted ERCES installation before issuing a Certificate of Occupancy.
A “benchmark test,” “grid test,” or “RF survey” measures your building’s existing public safety radio coverage and performance, as required by IFC Section 510 and NFPA 1225 §5.1. It’s the first step in any Georgetown ERCES project, since it lets our technicians map exactly where coverage falls short before any equipment is designed or installed. The test involves taking detailed signal strength readings throughout the property, floor by floor, to document current conditions. NFPA 1225 §5.1 requires this survey be completed before system design begins, establishing the baseline the Georgetown Fire Department uses to determine whether ERCES is required and which areas need coverage. That data then drives the design of a system sized correctly for your specific building, rather than a generic solution. Skipping this step, or having it done poorly, is one of the most common reasons Georgetown ERCES projects get delayed at inspection, which is why we treat it as a non-negotiable first step on every project we take on.
Timeline depends on your building’s size and complexity. We’ll give you a project-specific schedule after your initial Georgetown site consultation.
We install ERCES throughout Georgetown and greater Williamson County, alongside our service areas in Austin, Round Rock, and the broader Central Texas region.
Waiting until inspection day to find out your Georgetown building has a coverage gap puts your certificate of occupancy, and your tenants’ safety, at risk. Get in front of it with a system designed around your property from day one. Reach out to schedule a consultation, review your building’s specific requirements, and get a straightforward answer on your compliance timeline.
TC Tech Systems has served Georgetown and the greater Central Texas business community for over 30 years, and we’re ready to help your property stay safe and compliant too.
